1300 522 725 sales@crealt.com.au

LogicOil Online Partice Counter

Fully automated optical particle counting system with a laser diode light source for continuous monitoring.

Automated Optical Particle Counter

LogicOil’s ATEX online particle counter is a fully automated optical particle counting system equipped with a LASER-diode light source for continuous presentation of cleanliness codes that allows for simple integration in industrial data management systems.

 

Measurement Principle

Single particle detection is achieved using light extinction with a highly focussed laser beam. As the entire measurement cell is illuminated, even very clean liquids can be measured.

Each LogicOil ATEX particle counting system is individually calibrated and certified. An important requirement in high-risk or explosive environments.

ATEX PC Features

  • 8 channel contamination measurement
  • Measures and displays the following international cleanliness formats: ISO 4406:2021, AS 4059 A-F
  • RS485, 4-20mA Data logging and 4000 test result memory
  • Automatic and remote control flexibility
  • Multicolour indicators via onboard LED with output alarm signals as standard
  • POV software

 

Status LED

  • 3 digit ISO Code
  • LED for measurement OK
  • 3 LED green/yellow/red configurable

*Flow rate of particle counter 10ml/min or 25ml/min

Technology & Specifications

Technical Specification Fully automated optical particle counting system with LASER-diode light source for continuous presentation of cleanliness codes. Simple integration in industrial data managing systems Measurement principle: single particle detection using light extinction with a highly focussed laser beam. The whole measurement cell is illuminated hence very clean liquids can be measured. Every system is calibrated and certified individually.

DATA STORAGE
Up to 4000 tests

PARTICLE SIZING
>4,6,14,21,25,38,50,70pm©

COMMUNICATION OPTIONS
RS485, 4-20Ma

ANALYSIS RANGE
ISO 4406:2021 Code 0 to 22 AS4059 A-F

OUTPUTS
Outputs via control POV software

ACCURACY
± 1/2 ISO code for 4,6,14 pm(C) ±1 code for 21,25,38,50,70 pm(C)

ENVIRONMENTAL PROTECTION
Ip69

WEIGHT / DIMENSIONS
37.5 kg, Height 275 mm, Depth 410 mm, Width 410 mm

CALIBRATION
Individually calibrated with ISO Medium Test Dust (MTD) to ISO 11171:2022

SUPPLY VOLTAGE
18-36VDC

OPERATING FLOW RATE
Internal pump, set rate 10ml/min or 25ml/min – 6 BAR max pressure

VISCOSITY RANGE
Up to 1000cSt

CURRENT SUPPLY
2.5Amp 24V – 500mA

TEMPERATURE
Operation Minimum: -10c +55c Storage Minimum: -25c +80c Fluid Minimum: +5c
+80c

POWER CONSUMPTION
12Watt

OUTER CASING FINISH
Cast Aluminium, powder coat finish

PRESSURE
Internal pump max pressure 6 Bar. 400 bar regulator available on request

WETTED PARTS
316 stainless steel, ceramic pump body, FKM, Polycarbonate lense.

SOFTWARE
POV software provided per unit

TEST TIME
Adjustable 5 – 300 seconds. Start delay and programmable test intervals available

ATEX CLASSIFICATION
Ex db IIC T6 Gb -Ex tb IIIC T85°C Db – IP66/67 T Amb -20 / +55°C Zone 1 and Div 1

FLOW RATE MEASUREMENT
Internal pump, set rate 10ml/min or 25ml/min

INTERNAL LEAK DETECTION
Solid state optical sensor with external alarms

ELECTRICAL CONNECTION
Connection for DC power, Coms and leak detection through ATEX 6 Core approved gland

FLUID CONNECTION
4mm DUAL Ferrule Fitok Stainless steel 316-10ml/min 6mm DUAL Ferrule Fitok Stainless steel 316-25ml/mi

Resources & Downloads

LogicOil AutoVisc Enquiry 

For more information or to arrange a call from one of the Crea Fluid Analysis Team, please complete the contact form.  If your enquiry is urgent, please call us on 1300 552 725.

LogicOil ATEX Particle Counter Enquiry

NATIONAL OFFICE

EMAIL

sales@crealt.com.au

accounts@crealt.com.au

service@crealt.com.au

GET SOCIAL

PHONE

NSW: +61 2 4320 6672

VIC: +61 3 9017 4496

QLD: +61 7 3333 2171

WA: +61 8 6465 4576

NZ: +64 212 372 731

CONTACT US